Standard Plastic Tanks
Non Metallic Solutions
Conical Bottom Tanks
Available in HDPE, Polypropylene, PVDF
- 30° cone angle (18° for 400 gallons, 45° for 500 gallons)
- Complete drainage
- Better dispersal of solids
- Easy installation of welded or bulkhead fittings
- HDPE and polypropylene resins comply with 21 CFR Reg. 177.1520 PVDF 21 CFR 177.2510
- Require metal stands
- Clearance from the floor to bottom of the tank is 18 inches (12 inches on 10-gallon tank)
WARNING: Never use FRP casings alone as a tank. Always use a liner. Always use an FRP casing with your tank for continuous service at elevated temperatures, or storage of high specific-gravity materials.
| Part Number | Capacity in Gallons | Diameter | Over all height |
|---|---|---|---|
| CBT_00010A | 10 | 13.25" | 23" |
| CBT_00030A | 30 | 18" | 35" |
| CBT_00055A | 55 | 22" | 44" |
| CBT_00100A | 100 | 32" | 38" |
| CBT_00150A | 150" | 32 | 57" |
| CBT_00250A | 250 | 43" | 54" |
Closed Dome Bio Tanks
Available in HDPE and Polypropylene
Excellent for preparing media components and growing cultures. Closure and gasket material meet the specifications promulgated under the Federal Food, Drug and Cosmetic Act, for use involving contact with food for human consumption. Please refer to the specifications listed in Regulation 21 CFR177.1520(c) 3.1. Flat bottom on 75 liter size is ideal for use with magnetic stir bars. Large, 6 inch gasketed closures make filling and dispensing easy. Molded-in body grips on 75-liter size provide safe, convenient handling. Flat areas on 115 to 380 liter size for easy fitting installation. Molded-in graduations in liter and gallon increments. Individually packaged.
| Part Number | Capacity in Liter | Diameter | Over all height |
|---|---|---|---|
| BTFP00020A | 75 | 16.5" | 32" |
| BTFP00030A | 115 | 18.5" | 39" |
| BTFP00055A | 200 | 22" | 43" |
| BTFP00100A | 370 | 28.5" | 51" |
BioMixer
Pre-engineered, ready-to-use mixer packages, BioTech mixer overhead drives and lower assemblies/shafts and impellers have been specially designed to deliver maximum mixing efficiency. Each component has been carefully chosen to match a specific mixing vessel. Use them with the closed-dome bio tanks (Cat. ID. BTFP) and sanitary conical-bottom processing tanks. Requires 2" sanitary connection at 10° < (for conical units), 2" silicone gasket and true union.
BioMixer Overhead Drive, 110/220v 1/20 hp
Biomixer Overhead Drive, 110/220v 1/8 hp
Lower Assembly, 1/2" Shaft and Impeller (specify length)
Lower Assembly, 1/2" Shaft and Impeller, Encapsulated (specify length)